home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Cream of the Crop 20
/
Cream of the Crop 20 (Terry Blount) (1996).iso
/
bbs
/
ra2t_200.zip
/
RA_2_TAG.ENG
< prev
next >
Wrap
Text File
|
1996-06-07
|
24KB
|
499 lines
┌───────────────────────────────────────────────────────────────────┐
│ ▒▒▄ ▒▒▄ ▒▒▄ ▒▒▒▒▒▒▄ │
│ ▒▒█ ▒▒█ ▒▒█ ▒▒█▀▒▒█ │
│ ▒▒█ ▒▒▒▒▒▒█ ▒▒▒▒▒█▀ │
│ ▒▒▄ ▒▒█ ▒▒█▀▒▒█ ▒▒█▀▒▒▄ │
│ ▒▒▒▒█▀ ▒▒█ ▒▒█ ▒▒█ ▒▒█ │
│ ▀▀▀▀ ▀▀ ▀▀ ▀▀ ▀▀ │
│ ▒▒▒▒▒▒▄ ▒▒▒▒▒▒▄ ▒▒▒▒▒▒▄ ▒▒▒▒▒▒▄ ▒▒▄ ▒▒▄ ▒▒▒▒▒▒▄ ▒▒▒▒▒▒▄ ▒▒▒▒▒▒▄ │
│ ▒▒█▀▀▀▀ ▒▒█▀▒▒█ ▒▒█▀▀▀▀ ▀▒▒█▀▀ ▒▒█ ▒▒█ ▒▒█▀▒▒█ ▒▒█▀▒▒█ ▒▒█▀▀▀▀ │
│ ▒▒▒▒▒▒▄ ▒▒█ ▒▒█ ▒▒▒▒▒▄ ▒▒█ ▒▒█ ▒▒█ ▒▒▒▒▒▒█ ▒▒▒▒▒█▀ ▒▒▒▒▒▄ │
│ ▀▀▀▒▒█ ▒▒█ ▒▒█ ▒▒█▀▀▀ ▒▒█ ▒▒█▒▒▄▒▒█ ▒▒█ ▒▒█ ▒▒█▀▒▒▄ ▒▒█▀▀▀ │
│ ▒▒▒▒▒▒█ ▒▒▒▒▒▒█ ▒▒█ ▒▒█ ▀▒▒▒▒█▀▀ ▒▒█ ▒▒█ ▒▒█ ▒▒█ ▒▒▒▒▒▒▄ │
│ ▀▀▀▀▀▀ ▀▀▀▀▀▀ ▀▀ ▀▀ ▀▀▀▀ ▀▀ ▀▀ ▀▀ ▀▀ ▀▀▀▀▀▀ │
└───────────────────────────────────────────────────────────────────┘
J.H.R. Software is a TradeMark of J.H. Rietveld.
Copyright (c) 1992-1996 / J.H.R. Software (TM) / All rights reserved
J.H.R. Software (TM) / Burg Elsenlaan 197 / 2282 NE / Rijswijk / Holland.
Postbankaccount : 3625008 / ABN-Amro bankaccount : 43.15.68.383
Phone BBS : +31-70-3904193 / Phone FAX : +31-70-3904193
├────────────────────────────────────────────────────────────────────────────┤
■ 100% compatible with ON_OFF_A
■ If you are using a previous version of this program you have to overwrite
the *.EXE files, kill the configuration files and setup the progran with
RA_2_SET.EXE again.
■ RA_2_TAG.EXE is an EXTERNAL files and newfiles lister with TAG-OPTION for
use with RA 2.00. & 2.02 & 2.50 Fully FILEBASE supported.
■ RA_2_TAG.EXE has a REQUEST-OPTION build in for CD-ROM.
■ ANSI-users can TAG files with the cursorkeys and the enterkey.
■ This tagger has the possibility to scroll BACK. Handy if you forgot
to tag a file and you don't want to start up the lister again!
■ Fully control of the TIME and KBYTES LIMITS is build in.
The internal RATIO-check RA makes use of will be supported.
■ The LIST and DL security, FLAGS and NOTFLAGS are being controlled.
■ This program is fully MULTI-LINE and MULTI-LANGUAGE aware.
■ This program is fully compatible with MTS, Easytag and Filedoor.
■ A LOGFILE option is present. The areanumber, areaname and filepath are
written in the RA logfile, in COMPACT or EXPANDED mode.
■ Files tagged and bytes will be visible.
(If more then 10 MB or higher, only kbytes will be showed.)
■ The user definable screensize is used.
If 23 lines, double statusbar.
If 24 lines, single statusbar.
If 25 lines, NO statusbar.
If smaller than 23 or greater than 25 lines, the screen will be cleared
remotely. This because tagged files are not correctly shown to the sysop.
The userside is ok though!
├────────────────────────────────────────────────────────────────────────────┤
INDEX:
------
[ 1 ] Installation.
[ 2 ] CFG-file and RA setup.
[ 3 ] Limits and ratio.
[ 4 ] View option.
[ 5 ] Newfiles search option.
[ 6 ] Filesearch option.
[ 7 ] CD-ROM request option.
[ 8 ] Registration.
[ 9 ] Technical information.
[10 ] Thanks to the ßetatesters...
├────────────────────────────────────────────────────────────────────────────┤
[ 1 ] Installation.
This program makes use of 250 kbytes conventional DOS-memory.
If you want to be able to make an optimum use of your memory the *M
parameter should be used in RA.
Add to the 250 kbytes DOS-memory de size of your FILES.RA file.
This will be the total amount of memory this program makes use of and
that makes this program work for 100%.
If you don't have enough memory available it can happen that the last
areas are not listed.
A maximum of 2500 file-areas is being read. If you have more then that
the program will not list them.
A maximum of 100 files can be tagged ( < TAG > ).
Install this program, menutype 7, with the following parameters:
<path>RA_2_TAG.EXE -P:{path} -L:*N *X *M { Filelist option }
<path>RA_2_TAG.EXE -RA202: -L:*N *X *M { Filelist for ra 2.02 }
<path>RA_2_TAG.EXE -RA250: -L:*N *X *M { Filelist for ra 2.50 }
<path>RA_2_TAG.EXE -N: -L:*N *X *M { Newfile search option }
<path>RA_2_TAG.EXE -F: -L:*N *X *M { Filename search option }
<path>RA_2_TAG.EXE -K: -L:*N *X *M { Keyword search option }
-P: represents the filearea path
-L: represents the node
-N: represents the newfiles search option
-F: represents the filename search option
-K: represents the keyword search option
-R: represents the requested search option
-A: represents the number tagging like RA.
-RA202: only for ra v2.02.
-RA250: only for ra v2.50.
An extra line "Use the `S` key to stop searching" is visible for the users
when they use the NEWFILES / KEYWORD / FILENAME search options.
-G: can be used with the -N -F -K parameters and gives the opportunity to
search in the current group only.
-P:*0 can be used and gives the opportunity to search in the current area
only.
-E: causes an EXTRA tagfile for those who want to keep on using FILEDOOR.
This tagfile is written in the directory where your SET RA= variable
points to.
-R: only search for requested files by username.
-T: with this the USERTIME LEFT is set to 3 minutes before midnight,
which will prevent your system from being unable to run all your
daily events, presuming that you run you daily events around midnight!
Extra memory- and area-information is only visible with the -K: -N: -F:
parameters.
RA presents with *0 the filearea path
RA presents with *N the node
RA presents with *X the possibility to read or write the selected files
Ra presents with *M the possibility to swap into memory
The EXITINFO.BBS and DORINFO?.DEF and TAGFILE.RA are being read and
written in the CURRENT directory where RA is being processed.
The files RA_2_HLP.AS? and RA_2_INF.AS? have to be present in de directory
in which you installed this door.
These files can be edited as .ASC .ANS .AVT and makes it possible to create
different files for each language you are using.
If you are using only one language just name your files .ASC, .ANS etc.
If you are using more languages you can name them for example .AS1, .AS2
and so on.
├────────────────────────────────────────────────────────────────────────────┤
[ 2 ] Configuration and RA setup.
The file RA_2_SET.EXE is the setupprogram for this tagdoor.
The '0' option has to be run ALWAYS! Otherwise this door won't work at all.
The file RA_2_TAG.CFG is being made.
The other options are only needed if you are running RA with more then one
language.
If you are using more then one language and you select for example option
1 a special configurationfile is processed. The file-extension will be
corresponding to the languagenumber you have selected.
The setup consists of 4 pages.
In the first page you can define the colours you want to use and edit the
textparts < TAG > and [ REQ ].
< TAG > is shown to a user if she or he selected a file for download.
[ REQ ] is shown to a user if she or he selected a file that is cuurently
not available for download because that file is on a CD-ROM which
is at the moment not online.
The REQUEST-option will be mentioned later on in this document.
You can also activate the option if the ENTER should be used in the file-
discription or if de | (pipeline) should be used as an ENTER.
In the second page the position of the filename and the amount of kbytes
c